Car Tire Pressure Monitor Sensor TPMS for Toyota Camry 2007-2011 Corolla 4Runner Scion Lexus CT200h ES350 GS430 42607-33021

RETURNS ACCEPETED ON UNOPENED/UNUSED SETS.

IMPORTANT REMINDER:

1. APPLICABILITY:  

Please make sure the chosen product is correct for your own car model according all the information in our product details.

If you can not confirm, please send all the information you already had such as car model and year, VIN code and so on to us before placing any order.

2. INSTALLATION:

Trained or experienced person to disassemble and install is highly recommended.

3. AFTERSALES:

If you encounter any issues with your order, please contact us immediately. We will investigate the problem and provide a satisfactory resolution.

We value and appreciate your feedback. Your input helps us ensure our service and products meet your expectations.

Q&A

1. Q: WHY SHOULD I MONITOR MY CAR TIRE PRESSURE?

A:To be safe. Most car accidents result from factors such as tire aging, high speed, tire leaks, excessive heat, and overloading. To ensure your safety, regularly monitor the condition of your tires while driving.

2. Q: HOW CAN I CHOOSE THE CORRECT TPMS SENSOR FOR MY OWN CAR?

A:To save time and money, ensure you select the correct TPMS sensor for your vehicle model.

If you have an existing sensor, locate the part number on its body to purchase an exact replacement.

If you're unsure, please check the car model listed in our product\ details to find the same model as your own. 

 

3. Q: SHOULD THIS TPMS SENSOR BE PROGRAMMED BY MYSELF?

A: This TPMS SENSOR is pre-programmed, no need to be programmed again. So please make sure this one is the exact one for your car.

4. Q: CAN I INSTALL IT BY MYSELF? AND HOW SHOULD I OPERATE IT?

A: Trained or experienced person should disassemble and install.

Before installation, we recommend reading the sensor ID by TPMS diagnostic unit to make sure the sensor is qualified. This is not mandatory but in case of the sensor is broken in the installation process. 

After installation, we recommend reading the sensor ID by TPMS diagnostic unit again.

5. Q: HOW CAN MY CAR RECOGNIZE THE NEW TPMS SENSOR?

A: There are two ways for your car to relearn the new TPMS SENSOR.

【1】AUTO RELEARN.

Step 1: After installation, the car should be locked and stationary for about 30mins.

The I-key should get far away from the car 5 meters or more.

Step 2: Drive for 10min, tire pressure alarm lamp will disappear.

(Attention: Some car don’t have this function, and you must go to OBDII method.)

【2】OBDII method

Step 1: Must use diagnostic with TPMS OBDII function.

Step 2: Turn ignition ON.

Step 3: Connect the OBDII Cable/Module to OBD connector.

Step 4: Follow the diagnostic screen’s learning instruction until OBDII learning successfully.

Step 5: Drive for 20mins if the TPMS warning lamp remains ON.

(OBDII method is the most stable way to relearn the TPMS.)